10 Best Corded Hammer Drills of 2021 Compared & Reviewed

Best Corded Hammer Drill
Photo: Black & Decker

Hammer drills – when fitted with the right masonry bits – are handy and reliable tool you can use to boreholes into concrete stone, mortar, or brick.

During operation, a hammer drill will spin the same way a regular drill does, but it also includes a forward, hammering motion, which helps drive the bit deeper into the work surface, for more performance and drilling efficiency.

If you do a lot of masonry and concrete projects, this drill is the ideal tool for you. And in our corded hammer drills review, we help you choose a model that meets your projects demands best.

Corded vs. Cordless Hammer Drills Compared

Corded vs. Cordless Hammer Drills
Photo: Skil

When shopping for a hammer drill, you’re likely to encounter the tool in 2 major types: cordless, and corded hammer drill models. Here’s how the two types differ.

Corded Hammer Drills

This hammer drill is most useful in settings that have a main’s electricity supply because that is its main source of power.

To use the tool, simply plug it into a 120-volt AC power source through the power cord attached to it. These drills tend to have higher RPM and more power than battery-powered models.

The advantage of corded hammer drills is that with them, you don’t need to worry about limited battery life cutting you short, or battery recharges that tend to take time.

Cordless Hammer Drills

These hammers drills are battery-powered, making them especially handy and useful in job sites without an electricity supply close by.

And don’t be thrown off by the battery. The new and advanced 18-20-volt batteries used on these drills produce enough power to rival corded models.

These drills tend to be more portable than corded ones. You will experience their true power when you use them on light-duty drilling applications.

What To Check Before Buying Corded Hammer Drill?

How to Buy the Best Corded Hammer Drill
Photo: DeWalt

1. Power of Corded Hammer Drill

Corded hammer drills rely on mains electricity as their primary source of power. For this reason, the power of these tools is measured in amps. The higher the amps a drill produces, the more powerful it is.

Typically, drills whose power rating is 8 amps and above are considered high-performance and are capable of delivering on most of the intensive drilling tasks you’ll undertake. The 10-amp DeWalt DWD520K is one such high-performance drill.

For light-duty tasks, lower-power drills, such as those producing 6 amps and below, come in handy especially because of their energy efficiency.

2. Speed

Your corded hammer drill combines rotating and impact speed to produce the drilling effect. The speed of your drill is measured in rotations per minute (RPM).

The higher the RPM rating of the drill’s motor, the faster it is. High-speed drills such as those producing 3,000 RPM and over, are great for shortening drilling time and working on tough material such as concrete.

One of the models that stood out in this category is DeWalt DWD520K, which has a 2-speed-range motor. You can choose between 0-1,200 RPM or the 0-3,500 RPM range for versatile speed options.

3. Corded Hammer Drill Weight

When it comes to power tools, lightweight models are generally preferred to heavy ones, and hammer drills are not an exception.

Lightweight corded hammer drills, typically weighing less than 5 pounds, are easier to handle because they reduce hand strain while offering enhanced maneuverability.

A lightweight drill will support extended usage, for day-long drilling tasks, without subjecting you to fatigue. And of the sub-5-pound models on our list will give you all the benefits of a lightweight tool.

4. Safety

Corded hammer drills produce a lot of power that is channeled to the drill bits. Therefore, user safety is a key consideration to make when using the tool, to prevent injury and related hazards.

While the drill bits cannot be shielded during operation, you can ensure your safety by controlling the tool’s speed using the dial knob, which can increase or reduce the speed depending on the current task.

Some models come with safety guard switches that prevent accidental triggering of the drill. The more the safety features built into your drill, the safer it is for you to use.

5. Your Budget

Obviously, the budget plays a huge part in determining the corded hammer drill model you choose.

If you’re on a strict budget, there are high-quality models you can get for less than $50. In fact, Tacklife PID01A, our best overall corded hammer drill, costs less than $40.

It’s worth noting, however, that drills tend to get pricier than their motor power increases. Such drills may be expensive but deliver reliably on heavy-duty tasks.

10 Best Corded Hammer Drills Reviewed




Tacklife PID01A

1. Tacklife PID01A (Best Overall)

  • Power-efficient and affordable
  • Included 12 versatile drill bits
  • Convenient lock-on button
  • Flexible 360-degree handle
Meterk Corded Electric Drill

2. Meterk Corded Electric Drill (Best Budget)

  • Powerful and pocket-friendly
  • High 0-3,000 RPM speed
  • Screw tightener and loosener
  • Convenient speed lock-on button
DeWalt DW511

3. DeWalt DW511 (Best Lightweight)

  • Lightweight at 4.3 pounds
  • Powerful 7.8-amp motor
  • Motor overload protection
  • 360-degree convenient handle
DeWalt DWD520K

4. DeWalt DWD520K (Best Professional Drill)

  • Versatile 0-1,200/0-3,500RPM speed
  • High-performance 10-amp motor
  • Supports divers of drilling tasks
  • Superior soft 360-degree grip
Milwaukee 5376-20

5. Milwaukee 5376-20 (Durable Construction)

  • Heavy-duty all-metal case
  • Powerful 8-amp motor
  • Sturdy and durable metal chuck
  • Over-mold vibration-reduction grip
Makita 6302H

6. Makita 6302H (Easy-to-use)

  • Large 2-position side handle
  • Enhanced operation control
  • Big well-placed buttons
  • Belt clip for portability
Makita HP1641K

7. Makita HP1641K (Versatile)

  • A Versatile multi-application drill
  • Lightweight and easy to handle
  • Continuous operation option
  • Soft comfortable grip
Skil 6445-04

8. Skil 6445-04 (Great for Woodworking)

  • Heavy-duty keyed chuck
  • Reliable 7-amp motor
  • Handy variable speed control
  • Reversible 360-degree handle
Black & Decker DR670

9. Black & Decker DR670 (For Brick)

  • High-torque 6-amp motor
  • Lightweight and easy to handle
  • Heavy-duty all-metal chuck
  • Optimized pistol handle
Tacklife PID03A

10. Tacklife PID03A (For DIY Projects)

  • Decent 7.1-amp motor
  • Dual drill and hammer drill
  • Durable metallic head cover
  • Curved depth rod for accuracy

1. Tacklife PID01A – Best Overall

Tacklife PID01A

Photo: Tacklife

  • Motor Power: 6 Amp, 710 Watts
  • Speed: 0-2,800 RPM
  • Chuck Size: 1/2-inch
  • Weight: 5.5 pounds

Power-efficiency, versatility, and affordability make Tacklife PID01A our best overall corded hammer drill.

This drill is one of the most energy-efficient in its class, producing 6 amps, but drawing only 710 watts of power. A variable speed of 0-2,800 RPM will support many of the drilling tasks you’ll ever undertake at home.

Another reason to choose this affordable tool is its 12 multi-size drill bits. Combined with a hole saw kit set, the tool is ideal for many home-drilling tasks on materials such as concrete, masonry, wood, metal, and plastic.

You can then use the drill’s lock-on button to reduce hand fatigue during prolonged operations. A versatility booster is the tool’s forward and reverse switch, which you can use for tightening or loosening screws.

Its 360-degree rotating auxiliary handle that offers the best grip while providing operational flexibility. You can count on the metal chuck to simplify drill changes and enhance durability.

We, however, wish Tacklife PID01A’s power cord was longer. Its 6-foot cord is rather short.


  • Power-efficient
  • Pocket-friendly price
  • Many accessories included
  • Versatile and easy to operate


  • The power cord could be longer

2. Meterk Corded Electric Drill – Best Budget

Meterk Corded Electric Drill

Photo: Meterk

  • Motor Power: 7.0 Amp, 850 Watts
  • Speed: 0-3,000 RPM
  • Chuck Size: 1/2-inch
  • Weight: 5.3 pounds

If you’re on a strict budget and looking for a corded hammer drill that offers premium features, then Meterk Corded Electric Drill is a wise choice.

It is one of the most affordable drills you can buy today. For less than $40, you are getting a 7-amp, 850-watt motor. Also, it offers a variable speed of 0-3,000 RPM, which is one of the highest in its class.

Because the tool combines 2 functions, the hammer drill, and regular drill, you can use for demanding tasks such as concrete and masonry drilling, and also tasks such as TV, furniture, wall, door, and window installation. You can use the tool for tightening or loosening screws with its separate forward and reverse switch.

A user-friendly feature you’ll instantly appreciate and use regularly is the tool’s lock-on handle, which enables speed locking and eliminates the need to constantly hold the trigger, thus reducing hand strain.

Meterk Corded Electric Drill’s depth gauge is, however, plastic and not very reliable. It could be improved further.


  • Pocket-friendly and powerful
  • High variable speed
  • Also works on screws
  • Convenient speed locking


  • Low depth gauge quality

3. DeWalt DW511 – Best Lightweight

DeWalt DW511

Photo: DeWalt

  • Motor Power: 7.8 Amp, 650 Watts
  • Speed: 0-2,700 RPM
  • Chuck Size: 1/2-inch
  • Weight: 4.3 pounds

For extended drill operations where fatigue reduction becomes a top priority for most users, DeWalt DW511, our best lightweight corded hammer, is the ideal choice.

Weighing only 4.3 pounds, you will barely feel the weight of this tool in your hand. It is able to minimize hand fatigue so that you can operate it for as long as your drilling task lasts, without feeling the strain.

It boasts of a powerful 7.8-amp motor, which not only delivers in the most demanding tasks but also features DeWalt’s overload protection technology, which prevents tool damage, especially in power-demanding tasks.

Also, it comes fitted with a 360-degree handle for greater control. You can use the included depth rod to achieve enhanced depth accuracy.

We recommend, however, that you consider upgrading to DeWalt DW511R Hammer Drill which is a newer version of the tool offering more power (8.5-amp), and a 2-finger trigger for enhanced comfort.

A slight inconvenience of DeWalt DW511 is the lack of instruction on how to attach the chuck key included. It takes a bit of time and effort to figure that part out.


  • Lightweight for reduced fatigue
  • Powerful motor
  • Overload protection
  • Enhanced tool handing


  • Hard to attach chuck key

4. DeWalt DWD520K – Best Professional Corded Hammer Drill

DeWalt DWD520K

Photo: DeWalt

  • Motor Power: 10 Amp, 1,100 Watts
  • Speed: 0-1,200/0-3,500 RPM
  • Chuck Size: 1/2-inch
  • Weight: 6.0 pounds

For professionals who undertake regular heavy-duty drilling tasks on concrete and other materials, the powerful, variable-speed DeWalt DWD520K is their best drilling companion.

The tool packs a powerful 10-amp motor, which is the best-performing in all the models on our list. Its patented design enables the motor to produce 50% more power than standard models, alongside superior overload protection.

It boasts of a 2-speed range that allows you to choose between one range (0-1,200 RPM) and a second range (0-3,500 RPM). This flexibility in speed selection provides you with enhanced control of the tool and its performance during high-torque application.

Because the drill has a dual-mode feature, you can use across a vast selection of applications including masonry, steel, and wood.

Further operational control is provided by the 360-degree locking side handle, whose positioning you can adjust to accommodate your desired comfort levels.

DeWalt DWD520K is, however, a pricey drill and is the most expensive on our list, making it unappealing to buyers on a budget. We also wish it was a bit lighter. Its 6 pounds is on the higher end.


  • Variable speed for versatility
  • High-performance motor
  • Supports multiple applications
  • Enhanced handling and control


  • Expensive
  • Could be lighter

5. Milwaukee 5376-20 – Most Durable

Milwaukee 5376-20

Photo: Milwaukee

  • Motor Power: 8.0 Amp
  • Speed: 0-2,800 RPM
  • Chuck Size: 1/2-inch
  • Weight: 4.9 pounds

With its all-metal gear housing, Milwaukee 5376-20 is one of the most durable corded hammer drills you can buy today.

The all-metal case bears the marks of a superior engineering process, which extends to the heavy-duty metal chuck that has been strengthened to make it twice as durable as its top competitor models. The chuck is great for accommodating intensive drilling

On top of durability, the drill is very powerful. It is fitted with a practical 8-amp motor that produces 0-2800 RPM of variable speed for consistent performance across a variety of tough tasks.

For ease of handling and operation, the tool features an over-mold grip for enhanced control and vibration reduction. It combines well with the tool’s compact 11.5-inch profile that allows working with the tool in tight spaces.

An issue we noted in Milwaukee 5376-20 is its depth rod, which is not very stable especially when subjected to some significant pressure.


  • Heavy-duty metallic build
  • Powerful motor
  • Durable chuck
  • Easy to handle


  • The depth rod could be firmer

6. Makita 6302H – Easy-to-use

Makita 6302H

Photo: Makita

  • Motor Power: 6.5 Amp
  • Speed: 0-550 RPM
  • Chuck Size: 1/2-inch
  • Weight: 4.8 pounds

When it comes to power tools such as hammer drills, ease of use, and operation are top priorities for most users, and this is where Makita 6302H excels.

The drill assumes a simplistic design that makes it easy to get started with operating the tool. It comes fitted with a large 2-position handle, which has been designed to increase your comfort during the tool’s operation. It enhanced tool control for more accuracy and safety.

You’ll enjoy working with the drill’s large reversing switch and lock-on button, which have been conveniently placed for easy reach and operation, effectively reducing any strain that could occur on your hands and fingers.

Also, it is equipped with a convenient belt clip you can use to attach the drill to your belt or holster and move around with the tool on the job site.

A rather disappointing feature of the Makita 6302H is its low 0-550RRPM motor speed, which can only manage light-duty drilling tasks.


  • Large handle for superior grip
  • Enhanced tool control
  • Large easy-to-reach buttons
  • Convenient belt clip


  • Low speed

7. Makita HP1641K – Versatile Corded Hammer Drill

Makita HP1641K

Photo: Makita

  • Motor Power: 6.0 Amp
  • Speed: 0-2,800 RPM
  • Chuck Size: 1/2-inch
  • Weight: 4.3 pounds

Designed to deliver superior versatility, Makita HP1641K has demonstrated exceptional drilling performance on concrete, steel, and wooden materials.

For concrete, the drill boasts of a high 5/8-inch cutting capacity, while it delivers a 1/2-inch cutting capacity on steel and a 1-3/16-inch one on wood. These capacities are supported by the capable 6-amp motor, and 0-2,800 RPM variable speed.

Also, the tool is impressively lightweight at only 4.3 pounds to reduce hand fatigue and support extended usage. You can comfortably achieve day-long strain-free drilling with this tool.

If you want to use the tool continuously without straining your hand and finger, use the recessed lock-on button that eliminates the need for constantly having your finger on the trigger.

Comfortable operation is further supported by the tool’s soft-grip handle. You love the keyless chuck that supports easy bit removal and installation. And you also get a tool case for protecting the tool and supporting portability.

Makita HP1641K is not very pocket-friendly, and will not favor buyers on a budget.


  • Versatile multi-application drill
  • Lightweight and easy to handle
  • Continuous operation option
  • Soft comfortable grip


  • Pricey

8. Skil 6445-04 – Great for Woodworking

Skil 6445-04

Photo: Skil

  • Motor Power: 7.0 Amp
  • Chuck Size: 1/2-inch
  • Weight: 5.5 pounds

If most of your drilling projects involve woodwork, then Skil 6445-04 is the corded hammer drill for you. Its chuck has been optimized to accommodate woodworking bits.

The drill comes with a 1/2-inch keyed chuck that is designed to accept large-diameter bits that are optimized for drilling and cutting wood. Besides wood, this hammer drill has also proven very reliable in drilling through metal sheets, and concrete surfaces.

A powerful 7-amp motor drives the drill and provides the performance needed to execute tough jobs flawlessly. You can use the tool’s variable-speed trigger to enhance your control over the drill.

It comes fitted with a user-friendly side handle, which is also reversible, this supporting both left-handed and right-handed users. You can rotate this handle 360 degrees so that you can use the drill in any direction or angle.

Some users may, however, find the Skil 6445-04’s power cord being inconveniently short, but that can be rectified easily by using an extension cord.


  • Large keyed chuck
  • Capable and reliable motor
  • Convenient speed control
  • Enhanced tool handling


  • The power cord could be longer

9. Black & Decker DR670 – Corded Hammer Drill for Brick

Black & Decker DR670

Photo: Black & Decker

  • Motor Power: 6.0 Amp
  • Speed: 0-2,800 RPM
  • Chuck Size: 1/2-inch
  • Weight: 4.39 pounds

The power, speed, and size of Black & Decker DR670 have been optimized for drilling tough materials such as brick and concrete. If your projects involve such, then this tool will get the job done.

This drill has a 6-amp motor, which produces a variable speed of 0-2,800 RPM. While the specs may seem modest, the motor manages a torque of 1400 inch-pound, which performs excellently on concrete and brick drilling tasks. Its 1/2-inch keyless chuck is an all-metal one, to support easy bit changes and maximum grip on bits.

You’ll especially love the compactness of this drill, which is complemented by its lightweight build. Because it weighs only 4.39 pounds and measures 11 x 4 x 11 inches, the drill will fit in the tightest of spaces and still deliver on tough tasks.

Also, to provide you with enhanced balance and control, the dill has been fitted with a pistol grip. The side handle on this drill helps improve control over the drilling process.

Some users may not like the metric scale on Black & Decker DR670’s depth gauge. It may take some getting used to.


  • Well-balanced power and speed
  • Compact and lightweight
  • Heavy-duty metal chuck
  • Superior handling and control


  • Depth gauge scale is metric

10. Tacklife PID03A – Best for DIY Projects

Tacklife PID03A

Photo: Tacklife

  • Motor Power: 7.1 Amp, 850 Watts
  • Speed: 0-3,000 RPM
  • Chuck Size: 1/2-inch
  • Weight: 5.85 pounds

Tacklife PID03B is a corded hammer drill whose features have been optimized for DIY drilling projects that are not too demanding but require a high-performance and consistent tool.

It runs on a pure copper motor, which produces 7.1 Amps of power while generating a 0-3,000 RPM speed. The combination of above-average power and speed makes the tool ideal for demanding wood, masonry, steel, and concrete projects.

You get dual drill and hammer functions, which you can toggle between very easily using the top button on the tool. The hammer drill function is ideal for concrete jobs because it offers a greater impact force.

To enhance durability, this drill comes with a metal head covering, which also enhances the tool’s dissipating effect.

A neat design enhancement is the tools curved metal depth rod, whose curvature makes the accessory better and more accurate than straight rods because the former can avoid obstacles.

To some users, the 5.85-pound Tacklife PID03 hammer drill may feel slightly bulky especially with extended usage.


  • Well-balanced power and speed
  • Dual functions for versatility
  • Durable metal covering
  • Accurate drilling performance


  • May feel weighty


Our corded hammer drill review demonstrates the value these tools offer when it comes to drilling tough materials and surfaces.

If you’re looking for the best of them all, go with Tacklife PID01A, a well-balanced all-around hammer drill that is powerful, affordable, safe, and comes with many accessories.

For those on a budget, Meterk Corded Electric Drill is your best bet. It is an affordable, value-packed, high-performance drill.

And if you’re a professional contractor, pick the heavy-duty DeWalt DWD520K. It is very powerful and comes with a variable-speed setting to offer the versatility needed for a wide range of applications.