The crosscut saws are quite popular among the gardeners as they have the ability to cut through the thick wood and large trees that a normal hand saw fails to do.
The best crosscut saw has a lethal blade, made of powerful steel quality to help you cut through the wood easily.
These saws usually have bigger blades and some of them need two people to operate. The handles are also firm enough to handle the strength of the saw.
This review will help you find the most appropriate product on the market. By the time you finish reading this review, you will be able to make a confident purchase. Explore the options below and make a wise purchase.
What To Check Before Buying Crosscut Saw?
As you start the search for the best crosscut saw, you will come across many aspects. When a beginner search for a suitable product, it is not uncommon to be not aware of all the options available online.
There are saws that can be operated by a single person. Also, there are models that are operated by two people.
This section of crosscut saw review will introduce you to all the essential features that you should look in a product. These are basic criteria of evaluating a product.
1. Type of Crosscut Saw
If you check closely, the crosscut saw is so named because it has cross teeth on it. This helps in increasing the rigidity of the saw and its capability to cut the thick wood.
In general, there are two types of crosscut saws that differ with its manageability. The saws that are lightweight and have a small blade are one man saw and the heavyweight ones with two handles on each end of the blade are the two-man saw.
Let’s discuss some more on both the types:
– One-man Crosscut Saw
The one-man crosscut saw is smaller. These usually have between 6 and 10 inches blade. The teeth are aggressive and these are lightweight and affordable.
On the downside, these saws are not very effective on large wood logs and pieces. They can only handle smaller trees and thinner wood.
– Two-man Crosscut Saw
As its name relate, these saws are handled by two people. The weight of the saw is a lot, and it has two handles on each side of the blade.
The blade size of these saws is also somewhat more than 24 inches or higher.
With these saws, you can cut the tree from its trunk bottom. This one can handle the harshest wood.
2. Blade
The toughness and aggressiveness of the blade is very important since it is to handle a difficult task like cutting the wood.
The length also matters. However, if you are buying a one-man crosscut saw then make sure that the blade length is not too much to give you difficult time in controlling the saw.
It is better if you can find a saw with replaceable blades. This way, when the blade loses its edge, you will be able to change it instead of changing the whole saw.
One more thing, make sure that the blade is coated with corrosion-resistant coating. It will help in increasing its life and eventually giving you more years to use it.
3. Teeth
The TPI or teeth per inch matters immensely in telling if a saw is useful or not. As the number of teeth will increase on the blade, the level of satisfactory cut will also increase.
For example, some saws have up to 21 teeth per inch. Such blades are aggressive and at the same time, these ensure neatness of the work.
The second thing about teeth of the blade is their angle. It is the angle between blade age and the tooth. It can be from 90 degrees to any smaller angle for effective working.
4. Handle
The manual crosscut saw consumes a lot of strength of the user. You have to hold the handle to operate the saw.
Therefore, the first need from a handle is to give you an effective and comfortable grip. It should be non-slipping because these saws can cause a lot of damage if it slips out of your hand.
Secondly, the handle should be ergonomic and well-designed so that you don’t face any problem while holding the saw. The weight distribution of the blade and handle should be well-balanced and in such a way that it does not pose any discomfort to your hand or arm.
5. Weight
A top-rated crosscut saw is the one that does not weigh too much. The kind of task performed by this saw is quite heavy-duty in itself. The extra weight will only cause more trouble for you.
Therefore, you need to make sure that the weight of the saw is decent and easy to carry. This way, your entire focus will be on cutting the wood than feeling uncomfortable due to the extra weight.
10 Best Crosscut Saws of 2021 Reviewed
IMAGE | PRODUCT | FEATURES |
|---|---|---|
 | 1. Irwin 2011201 (Cheapest) |
|
 | 2. Gyokucho No. 291 (Smallest) |
|
 | 3. Lynx 4FT2MAN (Largest) |
|
 | 4. Gyokucho 372 (Lightweight) |
|
 | 5. Suizan Japanese Saw (Durable Product) |
|
 | 6. Great Neck Saw N2610 (With Sharpened Teeth) |
|
 | 7. Wilfiks Pro Saw (Multi-functional) |
|
 | 8. Bahco PC-24-TIM (With 3-sided Ground Tooth) |
|
 | 9. Lynx 3FT1MAN (Heavy-duty) |
|
 | 10. Lynx WCLH26 (For Precise Cutting) |
|
1. Irwin 2011201 – Cheapest Crosscut Saw
- Blade Length: 15 inches
- Blade Material: Steel
- Weight: 16 ounces
For all those who are on a budget, this is the cheapest crosscut saw and comes with great value of money. Irwin gives you many stunning features in this model.
The 15 inches blade is made of steel material and comes with a tapered pitch nose that provide great clearance and stability. The M2 tooth technology and tri-ground teeth is for efficient cuts.
The thick body of this model is for the rigidity and durability. The handle is also equally amazing. This one has got pro-touch handle that ensure comfort and durability of the saw.
This one is a suitable saw. However, the steel does not come with any coating. Thus, it is susceptible to corrosion and rusting.
Pros:
- Crosscut saw available on the most affordable price
- Comes with tapered pitch nose
- Designed in thick body for firmness
- Comes with pro-touch handle
Cons:
- Steel is not coated so it is susceptible to corrosion and rusting
2. Gyokucho No. 291 – Smallest Crosscut Saw
- Blade Length: 7 inches
- Blade Material: Steel
- Weight: 4.8 ounces
So, this one from Gyokucho is the smallest crosscut saw that comes in overall size of 15 inches and the blade size is 7 inches. Among all the models mentioned in the list, the blade of this saw is the smallest.
Other interesting things about the blade is that it is removable. This way you can change it when the blade loses its edge. This is a lightweight saw that weighs only 4.8 ounce.
The handle of this model is also great. It has rubber coating on the top that keep the handle very comfortable and give effortless pruning experience.
Also, the handle is tilted, so it can fit in the awkward spaces and cut easily. The model is so compact that it easily fits inside the tool bag. Therefore, you can take it anywhere you want. Although this is an excellent product, but it does cannot do heavy-duty cutting.
Pros:
- Small size, easy to carry and use
- Comes with a removable blade
- Tilted handle for more reach
- Handle has rubber coating for easy holding
Cons:
- The saw is not for heavy-duty cutting
3. Lynx 4FT2MAN – Largest Crosscut Saw
- Blade Length: 48 inches
- Blade Material: CS80 Steel
- Weight: 88 ounces
If you want the largest crosscut saw then this is the product for you. It comes with the blade length of 48 inches and made of CS80 steel. The steel of the blade is uncompromised. It will not corrode or rust any time soon.
It comes with peg tooth in 1 TPI pattern. The hand set tooth is very durable. However, with this saw, you can only do rough cutting. It is not fine cutting or wood detailing.
The blade can be re-sharpened and used for a long time. It is among the best two man crosscut saw and there are two beechwood handles on both the ends of the blade.
You will find it highly pricey. Also, the weight of 88 ounces is troublesome.
Pros:
- Available with a large blade
- High-quality steel
- Hand set tooth for durability
- Blade can be re-sharpened
Cons:
- Very heavy
- Very expensive
4. Gyokucho 372 – Lightweight Crosscut Saw
- Blade Length: 9-1/2 inches
- Blade Material: Steel
- Weight: 0.16 ounces
For all those that are searching for a basic crosscut saw with the least weight, this model from Gyokucho is a perfect purchase to make. It is only 0.16 ounce in weight and very easy to handle.
The 9-1/2 inches steel blade has hardened teeth and it comes with 1-1/2 inches width to ensure better performance. The blade is recommended for dovetail cuts.
It is ranked among the best one-man crosscut saw as it is lightweight and easy to use. It has an elongated handle, non-slip in nature. You will be able to make basic and light cuts on thin wood.
The handle is not ergonomic, so you might not want to hold the saw for a long time. It might tire your hand. Also, the steel will need maintenance as it is not coated with any special coating.
Pros:
- Very lightweight crosscut saw
- Comes with hardened teeth
- Blade suitable for dovetail cuts
- Very simple and easy to use
Cons:
- Steel will need a lot of maintenance, comes with no coating
- Handle is not ergonomic, may tire your hand
5. Suizan Japanese Saw – Durable Crosscut Saw
- Blade Length: 9.5 inches
- Blade Material: Japanese Steel
- Weight: 5.6 ounces
Suizan has high brand value. This model from Suizan is a durable model as the blade is constructed with Japanese steel. This steel is known for its strength and lethalness.
Its working mechanism is standard Japanese pull style. The blade length is 9.5 inches and it is a standard saw to handle basic gardening tasks.
The wooden handle is similar to that of the previous model. However, Suizan also fails in making the handle ergonomic that can prevent hand fatigue.
This model has very narrow kerf and it requires lesser strength to use the saw. This is also one-man crosscut saw and suitable for basic use. It offers smooth and accurate cuts. Unfortunately, Suizan is not offering any warranty on this product.
Pros:
- Very durable product made of Japanese steel
- Require less strength of working
- Suitable for basic gardening tasks
- Has a narrow kerf
Cons:
- There is no warranty with the product
- The handle is not so comfortable
6. Great Neck Saw N2610 – Best with Sharpened Teeth
- Blade Length: 26 inches
- Blade Material: High Carbon Steel
- Weight: 26.4 ounces
This model from Great Neck is known for aggressive cutting because of the sharpened teeth on the blade. It has got 10 teeth per inch which will increase the performance of the saw.
The high carbon steel blade is 26 inches in size. It is quite performance-friendly. Also, it will not require any special maintenance. It will stay away from rusting and corrosion for the longest time.
The handle is quite impressive of this model. It is made of wood and is completely non-slipping. The weather-resistant handle is dark stained. Not just the looks but it is very comfortable in holding.
Sadly, this product comes with limited period warranty. Also, the heavyweight of 26.4 ounces is not suggested for people with limited hand strength.
Pros:
- Comes with sharpened teeth
- 10 TPI is for more aggressive and rugged cutting
- Blade stays from corrosion and rusting
- Weather-resistant handle and pretty durable
Cons:
- The heavyweight saw is not suitable for people with limited hand strength
- It comes with only limited time warranty
7. Wilfiks Pro Saw – Multi-functional Crosscut Saw
- Blade Length: 16 inches
- Blade Material: High-Carbon Steel
- Weight: 13.6 ounces
This is a multi-functional saw that can be used for sawing, trimming, gardening, pruning, cutting wood, drywall, plastic pipes, etc. This is a versatile saw that will solve various purposes.
The 16 inches blade is quite efficient and has induction-hardened teeth that make it durable and more performance-friendly. It also makes the blade faster in cutting. It comes with 9 teeth per inch which is great for rugged cutting.
The high carbon construction is quite satisfying. The anti-slip super grip handle adds comfort and makes it easy for the holder to grip the handle and use the saw. It also reduces hand fatigue.
While you a lot from this model, it fails in giving warranty to the user.
Pros:
- Multi-functional saw for versatile use
- High carbon blade for durability
- 9 TPI for rugged cutting
- Comfortable handle for easy holding
Cons:
- There is no warranty with this product
8. Bahco PC-24-TIM – Crosscut Saw with 3-sided Ground Tooth
- Blade Length: 24 inches
- Blade Material: Steel
- Weight: 14.1 ounces
Bahco has launched this amazing one-man crosscut saw that comes with 3-sided ground tooth. This feature makes it capable of handling different kinds of wood.
It comes with 24 inches large blade made of steel material. The blade has 3-1/2 teeth per inch that is decent in working. However, the finishing will be very poor. Therefore, only use the saw for wood cutting that does not require finishing.
The super sharp GT toothing is also very effective and increases the cutting speed. As far as the handle is concerned, this model comes with a plastic handle which is decent in offering comfort. However, it is not very comforting.
Pros:
- Comes with 3-sided ground tooth
- Super sharp GT toothing
- Have increased speed of cutting
Cons:
- The handle is not extremely comfortable
- The blade does not offer neatly finished cuts
9. Lynx 3FT1MAN – Heavy-duty Crosscut Saw
- Blade Length: 36 inches
- Blade Material: CS80 Steel
- Weight: 63.52 ounces
The Lynx 3FT1MAN is a heavy-duty model that is used for heavy logs of wood. It comes with a large blade of 36 inches and will require 2 men for handling the saw.
The blade is constructed with CS80 steel which is quite durable and prevent rusting and corrosion for a long time. The blade thickness of 1.5 mm ensures the firmness and durability of the blade. The blade can be re-sharpened with a large triangular file.
The beech handle that is installed in the front of the blade and at the bottom is quite firm. However, the handle on the front is small. The heavyweight of 63.52 ounces is quite difficult to handle. Also, this model is priced heavily.
Pros:
- Heavy-duty crosscut saw
- Made of durable material
- Beech handle for comfortable holding
- Blade can be re-sharpened
Cons:
- Very expensive
- Very heavy
- Front handle is small in size
10. Lynx WCLH26 – Crosscut Saw for Precise Cutting
- Blade Length: 26 inches
- Blade Material: Steel
- Weight: 35.2 ounces
Unlike other two Lynx models on the list, this one gives you precise cutting. It has 9 TPI that works perfectly in detailing the wood.
The 26 inches long steel blade is quite amazing in performance. The saw gives you friction-free cutting. There is tapered ground for increased effectiveness of the saw. Also, the geometry of the teeth is in such a way that it gives best cutting action.
The handle of this model is pretty effective. Just like other products from Lynx, this one is also expensive. However, there is no warranty with it.
Pros:
- Useful for precise cutting
- High in performance
- Gives friction-free cutting
- Teeth geometry gives best cutting action
Cons:
- Pretty expensive
- Does not offer any warranty
Conclusion
A little piece of advice for the buyers, don’t rush with the purchase. Take your time and study everything about the best crosscut saws.
This will help in obtaining better understanding about these tools, and you will be able to make a confident purchase.
On this note, we would like to close the crosscut saw review and leave the rest to you.
You are highly encouraged to read the buying guide and then go to the products. Once you determine the things to check in these saws, you will be able to select the best model conveniently.
In this post:
- What To Check Before Buying Crosscut Saw?
- 10 Best Crosscut Saws of 2021 Reviewed
- 1. Irwin 2011201 – Cheapest Crosscut Saw
- 2. Gyokucho No. 291 – Smallest Crosscut Saw
- 3. Lynx 4FT2MAN – Largest Crosscut Saw
- 4. Gyokucho 372 – Lightweight Crosscut Saw
- 5. Suizan Japanese Saw – Durable Crosscut Saw
- 6. Great Neck Saw N2610 – Best with Sharpened Teeth
- 7. Wilfiks Pro Saw – Multi-functional Crosscut Saw
- 8. Bahco PC-24-TIM – Crosscut Saw with 3-sided Ground Tooth
- 9. Lynx 3FT1MAN – Heavy-duty Crosscut Saw
- 10. Lynx WCLH26 – Crosscut Saw for Precise Cutting
- Conclusion