10 Best Latex Paint Sprayers of 2021 Compared & Reviewed

Best Latex Paint Sprayer
Photo: Janvitha

Previously with a rubber base, latex paints now feature water-soluble bases that are built on vinyl and acrylics.

They are considered more environmentally friendly than the oil-based paints and are continuously replacing this oil type as the most preferred option in painting projects.

As such, it is important to have a latex paint sprayer, which should contain the right tip size and other features for this type of fluid.

That said, if you are looking for such a tool, the review below covers 10 of the best latex paint sprayers to consider buying.

What To Check Before Buying Latex Paint Sprayer?

How to Buy the Best Latex Paint Sprayer
Photo: HomeRight

1. HVLP vs Airless vs Siphon Paint Sprayers

Airless paint sprayers are generally considered the best for applying latex coats because they have high-pressure pumps that allow for the spraying of unthinned paint. This makes them very convenient because, with thinned paint, you need to apply several coats for quality finishing.

Additionally, most airless units have flexible suction tubes that allow you to spray directly from the paint can, which is very convenient.

HVLP sprayers operate in low pressure and thus, are economical in paint usage, but they are ideal for smaller projects because with low pressure, comes a slow flow rate, which means slow spraying.

As for siphon sprayers, you will need an additional compressor that meets the specific pressure and CFM requirements, which is an additional cost. On the bright side, these guns are usually very affordable.

2. Power

Most HVLP and airless paint sprayers are AC powered via a corded supply, but others have a DC power option. This makes them more versatile because they can be powered by a car’s battery in cases where there is no mains power or when there is a blackout.

On the other hand, siphon sprayers are powered via an external compressor and thus, if you already have this pneumatic tool, such a sprayer will be ideal.

3. Flow and Pattern Control

Adjustable speed and spray pattern settings are recommended because they make the sprayer more flexible while also giving you more control over the application process.

Flow control settings let you work at your own pace while pattern control makes it possible to switch between vertical, horizontal or round spraying for optimal application depending on the work surface.

4. Capacity

For those pieces that have paint cups, it is important to consider the size of this container for 2 reasons.

It should be large to hold enough paint for minimal refills, but not too large to weigh down the gun and cause hand fatigue.

The ideal size is 1 to 1.5 quarts (32 to 48 ounces).

5. Easy Clean-up

No one likes to do the cleaning after spraying. For this reason, you should get a unit that is easy to clean such as Graco Magnum’s X5.

This tool is fitted with a power flush adapter that connects to a garden hose and this allows you can pass water through the system to remove all the paint.

10 Best Latex Paint Sprayers Reviewed




Campbell Hausfeld DH420000AV

1. Campbell Hausfeld DH420000AV (Affordable)

  • Affordable
  • Convertible between a bleeder and non-bleeder type
  • Convertible to a siphon-feed or pressure-feed type
  • Adjustable paint-flow control
Astro Pneumatic Tool 4008

2. Astro Pneumatic Tool 4008 (Best Air Compressor Sprayer)

  • Adjustable wide fan with superior atomization
  • Anti-spill air feed line
  • Air and paint flow control valves
  • 32-ounce aluminum cup
Wagner Spraytech 0518080

3. Wagner Spraytech 0518080 (Best HVLP Sprayer)

  • HVLP sprayer with a stationary turbine base
  • Comes with a 20-foot hose
  • Adjustable spray pattern and paint flow
  • 2 air filters for dust removal
HomeRight C800971.A

4. HomeRight C800971.A (Best for Beginners)

  • Easy to use/clean HVLP paint sprayer
  • Includes 3 tips and a tip selection chart
  • 450-watt turbine and a 39-ounce paint container
  • Adjustable fluid flow and spray pattern
Graco 17D889

5. Graco 17D889 (Best Spray Gun)

  • Airless sprayer with 1500 PSI max pressure
  • VacuValve technology
  • Comes with 2 reversible tips and a carrying case
  • Uses flex liner paint bags
Graco Magnum 262805 X7

6. Graco Magnum 262805 X7 (Powerful Airless Sprayer)

  • Airless paint sprayer with a powerful 5/8 HP motor
  • Adjustable pressure with a high of 3000 PSI
  • High precision 0.017-inch spray tip
  • Comes with a 25-foot hose
Graco Magnum 262800 X5

7. Graco Magnum 262800 X5 (Has Reversible Tip)

  • Airless sprayer with a 515 RAC IV spray tip
  • 3000 PSI max pressure with adjustable settings
  • Fitted with a power flush adapter
  • Includes a 25-foot hose
Critter Spray Products 22032 118SG

8. Critter Spray Products 22032 118SG (Lightweight)

  • Lightweight siphon sprayer
  • 16-ounce glass paint jar
  • Flow control nozzle
  • Easy to clean
Rexbeti Ultimate-750

9. Rexbeti Ultimate-750 (Adjustable)

  • HVLP spray gun with adjustable flow control
  • Adjustable spray pattern
  • Includes 2, 2.5- and 3-mm nozzles
  • 1-liter (34-ounce) paint cup
Titan Tool ControlMax 1700 Pro

10. Titan Tool ControlMax 1700 Pro (Efficient Airless Sprayer)

  • HEA technology reduces overspray by up to 55%
  • Comes with a 50-foot hose with support of 100 feet
  • Cart design with onboard tool storage
  • Adjustable pressure

1. Campbell Hausfeld DH420000AV – Most Affordable

Campbell Hausfeld DH420000AV

Photo: Campbell Hausfeld

  • Type: Siphon
  • Power Source: Pneumatic
  • Max. Pressure: 40 PSI
  • Weight: 2.6 pounds

If you are on a tight budget, Campbell Hausfeld’s DH420000AV is an affordable latex paint sprayer to consider.

That said, the unit comes as a gun alone without a turbine or compressor, but is convertible between a bleeder and non-bleeder sprayer for use with tankless or standard compressors, and can be hooked up to paint tanks or remote tanks when working on large projects.

Additionally, the gun is convertible between a siphon-feed and pressure-feed type so as to allow you to work with a variety of materials such as stains, primers, enamel and of course, latex paint.

Other features include a paint flow regulator for controlling the material output, a 1-quart paint cup, internal and external mix air caps and it requires a minimum of 2 CFM at 40 PSI to run.


  • Affordable
  • Convertible between a bleeder and non-bleeder type for versatility in compressor use
  • Can be used to spray a wide variety of materials
  • Paint flow regulator for more control


  • Compressor not included

2. Astro Pneumatic Tool 4008 – Best for Latex

Astro Pneumatic Tool 4008

Photo: Astro Pneumatic Tool

  • Type: Siphon
  • Power Source: Pneumatic
  • Max. Pressure: 60 PSI
  • Weight: 3 pounds

Astro Pneumatic Tool’s 4008 stands out as one of the best air-compressor-powered paint sprayers for latex because of a couple of reasons.

For starters, it has a fully adjustable wide fan pattern that can be enlarged up to 11 inches in size from a spraying distance of 8 inches. This allows you to apply an even coat while also reducing the work duration by switching to a wide jet with superior atomization for faster coverage.

The tool also has an anti-spill air feed line, which allows you to spray at any angle while maintaining optimal suction and without paint spillage.

You get a sturdy 32-ounce aluminum cup, air and fluid control valves, a 1.8mm nozzle and a 50-60 PSI operating pressure. However, you need an additional compressor to run this gun, which should have a power rating of 3 HP minimum.


  • Fully adjustable fan pattern for more control
  • Anti-spill air feed line allows for spraying at any angle
  • Air and fluid flow control valves
  • Sturdy 32-ounce aluminum cup


  • Compressor not included

3. Wagner Spraytech 0518080 – Best HVLP

Wagner Spraytech 0518080

Photo: Wagner Spraytech

  • Type: HVLP
  • Power Source: AC/DC
  • Max. Pressure: 2.7 PSI
  • Weight: 10 pounds

As an HVLP paint sprayer, Wagner Spraytech’s 0518080 is one of the best for applying latex paint because it has a stationary turbine base that is connected to the gun via a 20-foot hose.

Not only does this give you enough allowance to reach all the corners of your project, but it also leaves less weight and bulkiness on the gun, which means reduced fatigue and a compact sprayer that can fit easily in tight spaces.

Other than that, the sprayer has adjustable paint flow settings for customizing the intensity of the coat, and an adjustable spray pattern that can be switched to vertical, horizontal or circular by turning the air cap.

On the downside, the included spray tip is not adjustable for easy clog removal but at least you get two air filters that keep dust from penetrating into the system.


  • Stationary turbine design with a 20-foot hose leaves a less bulky and easily portable gun
  • Adjustable paint flow
  • Adjustable spray patterns
  • 2 air filters for keeping out dust


  • Nonreversible spray tip

4. HomeRight C800971.A – Best for Beginners

HomeRight C800971.A

Photo: HomeRight

  • Type: HVLP
  • Power Source: AC
  • Weight: 2.76 pounds

HomeRight’s C800971.A is recommended for beginners because it is easy to use (requires no additional compressor to get down to work), easy to clean and there is a tip selection chart available to guide you in picking the best one for your project from the 3 included pieces.

That said, this product is fitted with a 450-watt turbine that can handle thicker paints, which means less thinning.

Other features include a large 39-ounce paint cup and adjustable paint flow and spray pattern for complete customization and control.

However, the turbine on the head makes the gun very bulky and the tips are not reversible for easy clog removal.

Read detailed HomeRight C800971.A review


  • Easy to use and clean
  • Powerful 450-watt turbine; can handle thick paints without thinning
  • Large 39-ounce paint cup requires less refills
  • Adjustable paint flow and spray pattern


  • Nonreversible spray tip
  • Bulky spray gun. Might not fit easily in tight spaces

5. Graco 17D889 – Best Spray Gun for Latex Paint

Graco 17D889

Photo: Graco

  • Type: Airless
  • Power Source: AC
  • Max. Pressure: 1500 PSI
  • Weight: 3.8 pounds

Graco’s 17D889 is the best spray gun for latex because it is an airless sprayer that packs in a compact stainless-steel piston pump, delivering a relatively high max pressure of 1500 PSI as compared to other gun-only units.

This enables you to spray unthinned paint at high speed and the pressure is adjustable for control over the application speed.

You get two 0.015-inch reversible spray tips that are easy to unclog, onboard storage for the extra tip, easily reusable and recyclable flex liner paint bags for quick material changing, VacuValve technology that allows you to spray in any angle and a storage/carrying case.

The only problem is that the tool has a short 1.5-foot power cord, which means you need an extension cord for longer reach.


  • Relatively high 1500 PSI max pressure rating with adjustable settings
  • Comes with 2 reversible tips that are easy to unclog
  • Reusable and recyclable flex liner paint bags
  • VacuValve technology allows for spraying at any angle


  • Short 1.5-foot power cord

6. Graco Magnum 262805 X7 – Powerful Airless Latex Paint Sprayer

Graco Magnum 262805 X7

Photo: Graco

  • Type: Airless
  • Power Source: AC/DC
  • Max. Pressure: 3000 PSI
  • Weight: 23 pounds

Top of the list is this powerful sprayer, which is equipped with a strong 5/8 horsepower motor and a stainless-steel piston pump that can push out unthinned latex paint at a high pressure of 3000 PSI. This gives a high flow rate of 0.31 gal/min for quick application.

A 25-foot dura flex hose is included with this unit, and it provides the pathway to a high precision 0.017-inch spray tip, which delivers a fine jet for high-quality finishing. This tip is also reversible, which makes it easy to undo clogs in case of any blockage.

Apart from the 25-foot hose, this sprayer can support an additional 75 feet, and this will give you enough allowance to spray your latex paint around your project, including to move to second and third floors if painting walls.

You also get adjustable pressure for paint flow control and a flexible suction tube that can be used on a 1- or 5-gallon bucket. The only problem is that this product is very costly.

More Detailed: Graco Magnum X7 Review


  • Powerful with a high flow rate for quick application
  • Includes a 25-foot hose and can support a total of 100 feet for extended reach
  • High precision spray tip that is reversible for easy clog removal
  • Adjustable pressure


  • Expensive

7. Graco Magnum 262800 X5 – Best with a Reversible Tip

Graco Magnum 262800 X5

Photo: Graco

  • Type: Airless
  • Power Source: AC/DC
  • Max. Pressure: 3000 PSI
  • Weight: 13 pounds

Just like when dealing with other coats, latex paint might cause clogging on the tip. This Magnum X5 is equipped with a 515 RAC IV spray tip, which is easily reversible so as to clear any blocking plugs with a simple twist.  

This enables you to work uninterrupted while a power flush adapter makes it easy to connect to a garden hose adapter for easy cleaning after use.

You get a 25-foot hose with support of up to 75 feet for extended reach, a stainless-steel piston pump that can spray unthinned latex paint at the maximum pressure of 3000 PSI and a pressure adjustment knob for giving you more control over the paint’s flow rate.

However, this tool does not have an adjustable spray pattern, which would come in handy when switching between painting vertical and horizontal surfaces.

Read detailed Graco Magnum X5 review


  • Reversible spray tip for undoing clogs with ease
  • Power flush adapter for connecting to a garden hose for easy cleaning
  • Comes with a 25-foot paint hose and can support up to 75 feet
  • Pressure adjustment knob for more control over the paint flow


  • Nonadjustable spray pattern

8. Critter Spray Products 22032 118SG – Lightweight

Critter Spray Products 22032 118SG

Photo: Critter Spray Products

  • Type: Siphon
  • Power Source: Pneumatic
  • Max. Pressure: 90 PSI
  • Weight: 1.65 pounds

With a lightweight 1.65-pound spray gun, Critter’s 118SG is very easy to handle because it places very little pressure on your hand. This means reduces hand fatigue, especially when spraying for long periods of time.

That said, the gun comes with a 16-ounce glass mason jar, which can be filled with latex paints, lacquers, stains, etc., depending on your project’s requirements. You can also use it to spray contact cement for laminations, as well as in other gluing projects.

Other features include adjustable material flow by moving the fluid nozzle up or down and an easy-to-clean design that requires you to simply pass air through the gun.

However, no pump or turbine is included with this kit. Instead, you need at minimum a 3/4 horsepower compressor that can generate up to 3 CFM at 90 PSI. Also, the included glass jar can easily break if mishandled.


  • Lightweight
  • Usable with paints, stains, lacquers and gluing applications such as contact cement
  • Adjustable material flow
  • Easy-to-clean


  • Turbine/pump not included
  • The included glass jar can easily break if mishandled

9. Rexbeti Ultimate-750 – Adjustable Latex Paint Sprayer

Rexbeti Ultimate-750

Photo: Rexbeti

  • Type: HVLP
  • Power Source: AC
  • Weight: 3.6 pounds

Rexbeti’s Ultimate-750 is equipped with multiple adjustable features that make it very versatile. It has a flow control knob for adjusting the paint output, which makes it easier to switch between edges or corners to large surfaces with minimal wastage.

On top of this, the spray gun’s tip can be adjusted to 3 different spray patterns: round, horizontal and vertical. This allows for painting on wide or narrow surfaces with ease.

You also get 3 nozzles in the set: 2- and 2.5-mm sizes for spraying thin paints and a 3 mm nozzle for milk, chalk and latex paints.

Other features include a 1-liter paint cup (34 ounces) and a soft-grip handle for comfortable use. However, the mounted turbine makes the gun a bit bulky and thus, it might not fit in tight spaces.


  • Adjustable flow control
  • Adjustable spray pattern
  • Comes with 3 nozzles (2, 2.5 and 3 mm)
  • Soft grip handle for comfortable use


  • Bulky spray gun; might not fit in tight spaces

10. Titan Tool ControlMax 1700 Pro – Most Efficient

Titan Tool ControlMax 1700 Pro

Photo: Titan Tool

  • Type: Airless
  • Power Source: AC
  • Max. Pressure: 1500 PSI
  • Weight: 37 pounds

This ControlMax 1700 Pro is also an airless sprayer, but it is unique because it features HEA (High-Efficiency Airless) technology, which reduces overspray by up to 55%, delivering a softer spray with a more consistent finish while improving the economics of paint use.

Other than that, the unit has a portable cart design that makes it easy to move the heavy 37-pound 0.6 horsepower pump, which delivers up to 1500 PSI and can spray unthinned paints.

The pump has a max flow rate of 0.33 gallons per minute, but this speed is adjustable for maximum control and productivity.

Other features include a 50-foot hose with support of up to 100 feet for extended reach, an onboard tool storage area and a paint filter to keep debris from getting into the system. On the downside, this sprayer is quite expensive.


  • HEA technology for overspray reduction by up to 55%
  • Cart design for easy portability
  • Adjustable pressure for speed/flow rate control
  • Includes a 50-foot hose and supports up to 100 feet for further reach


  • Relatively costly
  • Heavy

Tips for Using your Latex Paint Sprayer

Before getting into the actual spraying, there are some things that you need to do first. These are the tips/steps to follow.

  • If your sprayer comes with multiple differently-sized tips, attach the recommended size for latex paint spraying to the gun.
  • Fill the paint cup or insert the suction tube into the paint bucket. Remember to thin it if the sprayer cannot handle thick, unthinned paint.
  • Prime the sprayer if required.
  • Test the sprayer. Start by using the lowest pressure setting then spray at a distance of about 12 inches away from the surface. Make the necessary adjustments until you get the best results, then get down to work.


In summary, airless sprayers are generally considered the best for applying latex paint due to their high pressure/flow rate and their ability to spray unthinned paints. However, their high operating pressure results in wasteful overspray.

For this reason, Titan Tool’s ControlMax 1700 Pro stands out as the best latex paint sprayer due to its high efficiency, and it also packs in a 50-foot hose for extended reach.