5 Best Sprayers for Lacquer in 2021 Compared & Reviewed

Best Sprayer for Lacquer
Photo: Fuji Spray

Lacquer is a coating paint that contains a different composition as compared to oil-based and regular paints.

It contains resin and dries up to create a hard, durable finish, and is mostly used on wooden surfaces such as on furniture.

That said, you need a specific type of sprayer that can handle this paint for proper application.

Review below covers 5 of the best sprayers for lacquer that you can buy online.

What To Check Before Buying Sprayer for Lacquer?

How to Buy the Best Sprayer for Lacquer
Photo: Fuji Spray

1. Sprayer Power

There are two main power options, which are battery and mains AC. Since all the above lacquer sprayers are AC powered, the important thing to check is the turbine’s power. Powerful turbines will give you a higher air pressure output, which is ideal for quick spraying.

In this case, Fuji’s 2895-T75G Q5 has the most powerful turbine, churning out 9.5 PSI for fine atomization.

As for Ingersoll Rand’s 210G, it does not come with a turbine, but has a high operating pressure rating of 50 PSI and therefore, needs a powerful turbine or large compressor tank to run. With this engine, this sprayer is the most powerful and thus, ideal for covering large projects.

2. Pressure of Sprayer

As explained above, high pressure is ideal for fast paint application, but there is a catch. High-pressure output results in overspray, which is very wasteful. On the other side, low pressure leads to slow application.

The ideal sprayer to buy is the one with adjustable pressure settings such as Wagner Spraytech’s 0518080.

With this, you can set to high pressure when spraying over a wide surface and low pressure for high precision spraying across narrow surfaces.

3. Container Size

As a general rule of thumb, the larger the container size, the better because you will have minimal interruptions to refill the paint once it runs out. Therefore, large containers, like the 1.5 qt. cup in Wagner Spraytech’s 0518080, are ideal for large volume jobs.

However, when filled up, these can make the gun heavy, which might cause hand fatigue. Fuji’s PaintWIZ PW25150 takes care of this by including 2 cups: a smaller one for regular use and a large one for big volume jobs. This is highly recommended.

4. Tip Size

Given in millimeters (mm), large-sized nozzles that exceed 1.8mm are ideal for spraying thick paints such as unthinned lacquer.

On the other hand, mid-sized nozzles (1.4-1.8mm) are suitable for medium viscous paints while the small ones are ideal for less viscous thinned paints.

To give you more flexibility, we recommend getting a sprayer with multiple differently-sized nozzles such as Fuji’s PaintWIZ PW25000, which you can easily switch depending on the required application.

5. Adjustable Settings

Adjustability is also a big advantage to have and the more the adjustable settings, the better.

Ideally, the best sprayer should have adjustable air pressure settings for precision spraying control, an adjustable spray fan pattern and adjustable fluid flow to control the paint output.

6. Portability

Lastly, it is important to consider portability and the best sprayer design is the one that has a stationary turbine.

This keeps all the heavy machinery on the ground, leaving you with a light, less bulky gun to move around with.

5 Best Sprayers for Lacquer Reviewed




Wagner Spraytech 0518080

1. Wagner Spraytech 0518080 (Best Overall)

  • 2-stage turbine
  • Pressure, spray pattern and paint flow adjustment
  • Stationary base, gun, and 20-foot hose
  • 2 paint cups and 2 air filters
Fuji PaintWIZ PW25150

2. Fuji PaintWIZ PW25150 (Best Budget)

  • Affordable
  • 400-watt turbine
  • 2 paint cups and a viscosity cup
  • Material flow and spray pattern adjustment
Ingersoll Rand 210G

3. Ingersoll Rand 210G (Best for Large Projects)

  • Gravity-feed gun with 50 PSI operating pressure
  • Pressure, paint flow, and spray pattern adjustment
  • 0.63 qt. paint cup
  • Suspension hook
Fuji PaintWIZ PW25000

4. Fuji PaintWIZ PW25000 (With Multiple Accessories)

  • Comes with multiple accessories
  • Stationary turbine with a 20-foot hose
  • Paint flow and pattern adjustment
Fuji 2895-T75G Q5

5. Fuji 2895-T75G Q5 (Has Quiet Turbine)

  • Quiet 5-stage turbine with efficient cooling
  • Pressure and spray fan adjustment
  • Gravity-feed, non-bleed gun
  • 25-foot hose

1. Wagner Spraytech 0518080 – Best Overall

Wagner Spraytech 0518080
Photo: Wagner Spraytech
  • Power: Corded, 110V
  • Pressure: 1.5-2.63 PSI
  • Cup Size: 1, 1.5 qt.
  • Weight: 11.2 lbs.

Wagner Spraytech’s 0518080 takes the overall top spot because of a number of reasons. For starters, it is a very versatile unit that can be used to spray different materials. It is equipped with a 2-stage turbine that makes it easy to spray stains, latex, polyurethane paints, lacquers, etc.

The product is also split into two parts: a stationary base that houses the turbine, and a spray gun, with a 20-foot hose connecting them. This helps to reduce hand fatigue because the turbine’s weight is not placed on your hands as you spray.

Multiple adjustment settings are built-in, and these include a pressure control dial for setting the pressure between 1.5-2.63 PSI, a material flow dial and spray pattern adjustment, which can be set to horizontal, round or vertical.

Other features include 2 air filters that prevent dust from getting into the paint spray, a 1.5 qt. plastic cup that is ideal for large volume jobs and an extra 1 qt. professional-grade metal cup.

However, the gun has a siphon-feed mechanism, which is not as efficient as the gravity-feed design because it requires more air pressure.


  • 2-stage turbine; makes its use very versatile
  • Designed to reduce hand fatigue
  • Adjustable pressure, paint flow and spray pattern
  • Includes 2 cups and 2 air filters


  • Less efficient siphon-feed cup placement

2. Fuji PaintWIZ PW25150 – Best Budget

Fuji PaintWIZ PW25150
Photo: Fuji Spray
  • Power: Corded, 120V
  • Cup Size: 0.8, 1.4 qt.
  • Weight: 4.25 lbs.

If you are on a tight budget, Fuji’s PW25150 is an affordable lacquer paint sprayer to consider. Despite this, the unit has a relatively powerful 400-watt all-in-one turbine that is rated for indoor/outdoor use.

This HVLP system comes with 2 plastic containers that include a 0.8 qt. cup for regular use and a large 1.4 qt. cup for working on large volume projects. You also get a viscosity cup for testing the thickness of the paint if thinning is required.

Other features include fluid control settings for adjusting the material flow, an adjustable spray pattern to create a round, vertical or horizontal fan, 3 mesh strainers for keeping out the dirt and a cleaning brush for easy maintenance.

On the downside, you don’t get adjustable pressure settings and the all-in-one design places the turbine and gun together, making it very bulky. This means it may not fit in tight spaces.


  • Affordable
  • Relatively powerful turbine
  • Includes 2 plastic cups and a viscosity cup
  • Paint flow and spray pattern adjustment


  • Lacks pressure adjustment settings
  • Bulky design

3. Ingersoll Rand 210G – Best for Large Projects

Ingersoll Rand 210G
Photo: Ingersoll Rand
  • Pressure: 50 PSI
  • Cup Size: 0.63 qt.
  • Weight: 2.6 lbs.

Ingersoll Rand’s 210G is ideal for working on large projects, not because it has a very large paint cup, but because it has a high operating pressure of 50 PSI. This ensures you get a fast application rate for quick coverage.

Another benefit you get with this product is its gravity-feed design, which means less pressure is required to atomize the paint. This ensures that all the pressure is used to blow out the paint, as opposed to siphoning it.

That said, you get an air adjustment valve to control the air pressure, fluid knob to adjust the paint flow and a pattern knob adjustment for round, vertical or horizontal fan spraying.

Other features include a non-drip 0.63 qt. plastic cup, a suspension hook for hanging when not in use, a 1.4mm nozzle and a filter for keeping out dust and other impurities. However, no turbine is included with the gun. You need to buy portable air compressor to run it.


  • High operating pressure; fast sprayer
  • Efficient gravity-feed design
  • Pressure, paint flow, and spray pattern adjustment


  • Lacks a turbine

4. Fuji PaintWIZ PW25000 – Best with Multiple Accessories

Fuji PaintWIZ PW25000
Photo: Fuji Spray
  • Power: Corded, 120V
  • Cup Size: 0.8, 1.4 qt.
  • Weight: 10.2 lbs.

This lacquer paint sprayer is accompanied by multiple accessories, which include an extra 1.4 qt. paint cup for large volume spraying, an extra 1.8mm nozzle, 3 mesh strainers, a shoulder strap, a viscosity cup, and a cleaning brush.

That said, the main components include a powerful turbine, a 2.6mm nozzle that is assembled on the HVLP gun, a 20-foot hose for connecting the turbine to the sprayer, and a 0.8 qt. plastic cup.

With that assembly, the sprayer has adjustable paint flow settings for precision application and pattern adjustment for creating round, vertical or horizontal spray fans. On the downside, you don’t get pressure adjustment.


  • Includes multiple accessories
  • A 20-foot hose for flexibility
  • Paint flow and pattern adjustment controls


  • No pressure adjustment settings

5. Fuji 2895-T75G Q5 – Best with a Quiet Turbine

Fuji 2895-T75G Q5
Photo: Fuji Industrial Spray Equipment
  • Power: Corded, 120V
  • Pressure: 9.5 PSI
  • Cup Size: 0.63 qt.
  • Weight: 38.9 lbs.

Even though this 2895-T75G sprayer comes with a very powerful Q5 turbine, this powerhouse features a patented noise reduction feature for quiet running and is packed in a heat dissipation chamber for efficient cooling.

That said, the turbine has a 5-stage compression system that produces up to 9.5 PSI for fine atomization and is equipped with a variable speed dial for adjusting the motor speed. This gives you more control for precision spraying.

On the other side, you get a gravity-feed gun that is more efficient than the siphon-feed type because it requires less air pressure to atomize the paint. Additionally, this gun is non-bleed, which makes it more efficient.

Other features include spray fan adjustment from small to large, a 0.63 qt. plastic cup, a 1.3mm nozzle for fine finishing, a 25-foot hose for maximum flexibility, and a cleaning/ maintenance kit with lubricant.

The only problem is that this product is very expensive.


  • Quiet turbine with efficient cooling
  • Variable pressure dial for adjusting the motor speed
  • Efficient gravity-feed non-bleed gun
  • Long 25-foot hose


  • Expensive

How to Clean Up After Applying Lacquer?

There are two main types of lacquer paint and these require slightly different ways to clean after using the sprayer.

After Spraying Nitrocellulose Lacquer

After spraying nitrocellulose lacquer, disconnect the air hose from the gun then pull the trigger to allow all paint in the gun to drip into the container.

From there, use the provided cleaning kit to complete the process using the manufacturer’s instructions.

After Spraying Water-based Lacquer

With water-based lacquers, simply pass water through the gun to flush out all the paint and that’s it.

If some paint remained in the paint cup, return it to the can for use next time.


As you can see, lacquer sprayers are quite diverse, especially considering the pressure factor.

However, Wagner Spraytech’s 0518080 stands out as the overall best sprayer for lacquer because it has all the important features, ranging from a relatively powerful turbine to adjustable settings, a long hose for flexibility and reasonable pricing.

If you already have a compressor though, Ingersoll Rand’s 210G is the best option to buy while Fuji’s PaintWIZ PW25150 is your best bet if you are tight on cash.