6 Best Table Saws Under $200 in 2021 Compared & Reviewed

Best Table Saw Under $200

Photo: Rockwell

A table saw is basically a combination of a wide, flat working surface (table) and a circular spinning blade or T-shank blade moving up and down to cut your wood piece. It is a very handy woodworking tool that can be used for RIP, cross, scroll, and miter cutting.

However, most table saws are quite expensive, though there are a few that fall within the affordable range of less than $200. We have compiled them for you so that you can easily pick the best table saw under $200 that meets your needs from the review below.

Best Table Saws Under $200 Buying Guide

How to Buy the Best Table Saw Under $200
Photo: Worx

1. Budget

Even though these table saws cost less than $200, there are some on the list that is more affordable than others. Therefore, if you are on a tight budget, pick an affordable one like the TruePower 01-0819.

If you don’t mind spending though, Genesis’ GTS10SB is a good option to consider as it contains a lot of features that give you value for your money.

2. Power

Power goes hand in hand with performance. Measured in watts (sometimes amps), the higher this value is, the more powerful the motor. This implies that it has more torque to push the blade through hard materials at high speed for quick cutting. Therefore, the more powerful, the better.

3. Blade

Saw blades are usually categorized by size, number of teeth, and the material used to make them. Larger blades will give you a higher cutting capacity or maximum depth of cut, enabling you to slice through thicker pieces of wood, plastic, or metal.

On the other hand, a blade with more teeth is better because it leaves a smoother and cleaner surface.

According to FineHomeBuilding, few teeth cut faster, but the finish will be rougher. However, if too many, the blade will generate a lot of heat and may burn the wood. Generally, 24 teeth are good enough.

With regard to material, different blade coatings are designed for cutting different materials but for wood, to ensure you have carbide or alloy-tipped blades. The best table saw for the money, however, should come with a large blade set containing different pieces for different materials.

4. Cutting Capacity

This is usually determined by factors such as the size of the blade. You should be very careful when checking this because it will determine if the tool is suitable to cut the workpieces you are using.

Given in inches, this capacity basically determines the maximum thickness that the saw can cut, and the larger this is, the better.

5. Fence

A rip fence is usually included as an accessory, and it helps to give you more control when cutting long pieces of wood. Not all table saws come with it though. You should check whether this component is included, especially if you will be dealing with long workpieces.

6. Accessories

Apart from the fence, other accessories such as miter gauges, extra saws, vacuum adapters, and blade grips might be included in the set, and these give you more value for your money. All in all, the more accessories per set, the better.

7. Portable

Lastly, you need to check the portability factor. If you want an affordable table saw that you can easily bring to the worktable and back to storage after use, ensure that is it small and lightweight enough for easy carrying.

However, if you want to keep the table fixed in one position, your best bet will be the one that comes with a stand. Such table saws are usually very heavy but if portability is not your main concern, they are the best to consider buying because you won’t need an additional worktable.

6 Best Table Saws Under $200 Of 2021 Reviewed




Rockwell RK7323

1. Rockwell RK7323 (Has Miter Gauge)

  • 1.5-inch max depth cut for wood
  • 4-inch blade (comes with 5 t-shank blades)
  • Miter gauge and a large steel rip fence
  • Tool-free blade changing
NovelLife Mini Table Saw

2. NovelLife Mini Table Saw (Lightweight)

  • Compact and lightweight
  • DC powered (96 watts)
  • Low-noise motor
  • 3 circular saws and a miter gauge
Worx WX572L

3. Worx WX572L (Has Riving Knife)

  • Traditional guard and riving knife system
  • Miter gauge, rip fence and 5 t-shank blades
  • Safety switch
  • Instant toolless blade changes
Genesis GTS10SB

4. Genesis GTS10SB (With Stand)

  • Powerful 1800-watt, 15-amp motor
  • Comes with a stand
  • Performs rip, miter, bevel, and compound cuts
  • Self-aligning rip fence
Gino Development TruePower 01-0819

5. Gino Development TruePower 01-0819 (Best Budget)

  • Very affordable
  • Wobble-free blade design
  • Trigger switch with a safety button
  • Tool-free table height adjustment
TruePower 01-0130

6. TruePower 01-0130 (High Cutting Capacity)

  • 3.25-inch cutting capacity at 90˚ (2.5 inches at 45˚)
  • Powerful 1800-watt, 15-amp motor
  • Performs rip, miter, bevel, and compound cuts
  • Mounted on a steel stand

1. Rockwell RK7323 – Best Under $200 with a Miter Gauge

Rockwell RK7323
Photo: Rockwell
  • Power: 660 watts
  • Max Depth of Cut: 1.5 inches
  • Blade Size: 4 inches
  • Weight: 15 pounds

Miter cuts are very common in woodworking projects and this table saw comes with a miter gauge to help you create these slices accurately. The table actually has a groove built-in for fitting the gauge seamlessly and allows you to remove it when not required.

Other than that, you get a large steel rip fence for controlled cutting of long pieces, a vacuum port that can be hooked to a vacuum cleaner to suck out sawdust when cutting, and a 5-piece t-shank blade set for cutting wood, aluminum, ceramic tiles, and other metals.

With these blades, the tool’s cutting capacity is capped at 1.5-inches for wood, 1.25 inches for PVC, 3/8 inches for aluminum and ceramic, and 1/8 inches for steel.

More features include quick and tool-free blade changing (takes about 3 seconds), a carry handle for easy transportation, and a hold-down guard for protection purposes.

However, this tool is not equipped with a stand, which means you have to look for a place to position it unless you are comfortable using it from a low ground position.

More Detailed: Rockwell RK7323 Review


  • Equipped with a miter gauge for making accurate miter cuts
  • Large steel rip fence for controlled long cuts
  • Vacuum port for helping to pull out the dust
  • Comes with a 5-piece t-shank blade set
  • Quick and tool-free blade changing


  • Not equipped with a stand

2. NovelLife Mini Table Saw – Best With Lightweight

NovelLife Mini Table Saw
Photo: NovelLife
  • Power: 96 watts
  • Max Depth of Cut: 0.63 inches
  • Blade Size: 3 inches
  • Weight: 5.3 pounds

NovelLife’s mini-unit is the top-rated table saw under $200 in this review, and this can be attributed to its compact and lightweight design, which makes it very easy to handle. Though it does not have a built-in stand, its small size makes it use up very little space on your worktable.

Despite its small size, this tool has a solid steel unibody frame and a thick 5mm aluminum alloy platform that is strong enough to prevent deformation over time.

Included in the set are 3 circular saws blades: a 2.4-inch diamond blade for PCB boards, a 3-inch alloy blade for wood, ABS, acrylic, and a 3-inch HSS blade for bamboo, balsa, and plastic.

Other features include a miter gauge for precision miter cuts and a low-noise dual ball bearing 795-type motor that provides high torque for strong cutting power.

On the downside, this unit is DC powered, which means you must have a battery or AC to DC converter for you to run it. 


  • Compact and lightweight design
  • Sturdy solid steel frame with a thick aluminum platform
  • Comes with 3 circular saws for cutting different materials
  • Low-noise dual ball bearing motor
  • Miter gauge included


  • No built-in stand
  • Requires a DC power source

3. Worx WX572L – Table Saw with a Riving Knife

Worx WX572L
Photo: Worx
  • Power: 660 watts
  • Blade Size: 4 inches
  • Weight: 14.7 pounds

With a riving knife and traditional guard, Worx’s WX572L is very safe to use and gives you the allowance to make unlimited capacity rip and crosscuts, making it very versatile.

Additionally, the unit is equipped with an adjustable miter gauge, which allows you to make angled 0-60˚ miter cuts on either the right or left side.

You also get a rip fence, 5 t-shank blades, a blade grip, and vacuum adapter, as well as onboard storage for the blades, miter gauge, and rip fence.

Other features include a safety switch for preventing accidental starts, a carry handle for easy transportation, and instant tool-free blade changes, with universal compatibility to any 4-inch t-shank blade. However, the table saw does not come with its own stand.


  • Traditional guard and riving knife allow for unlimited capacity rip and crosscuts
  • Includes a miter gauge with a 120˚ range
  • Rip fence and 5 t-shank blades included as accessories
  • A safety switch prevents accidental starts
  • Instant tool-free blade changes


  • No stand

4. Genesis GTS10SB – Best with Stand Under $200

Genesis GTS10SB
Photo: Genesis
  • Power: 1800 watts
  • Blade Size: 10 inches
  • Weight: 56 pounds

Though very heavy and relatively expensive, Genesis’ GTS10SB comes fitted on a stand, and this makes it very easy and comfortable to use because you won’t have to look for a worktable or bend down to make your cuts.

Other than that, the unit is designed for rip, miter, bevel, and compound cuts, with the ability to perform bevel cuts up to 45˚ and comes with a miter gauge for miter cuts and to complete the compound cuts.

You also get a powerful 1800-watt, 15-amp motor with a top speed of 4,800 RPM for quick cutting with high torque, a self-aligning rip fence, a large 24 x 20-inch die-cast aluminum table, and on-board storage for the included accessories.


  • Fitted on a stand for easy, comfortable use
  • Designed for rip, miter, bevel, and compound cuts
  • Powerful 15-amp motor
  • Self-aligning rip fence automatically locks front and rear
  • Wide work surface (24 x 20 inches)


  • Relatively expensive
  • Heavy

5. Gino Development TruePower 01-0819 – Budget Table Saw

Gino Development TruePower 01-0819
Photo: Gino Development
  • Power: 96 watts
  • Max Depth of Cut: 0.625 inches
  • Blade Size: 4 inches
  • Weight: 8.29 pounds

Although all these table saws are quite affordable because they fall below the $200-mark, Gino Development’s TruePower 01-0819 is the most affordable of them all and despite this, it still has some very impressive features.

For starters, the unit has a wobble-free blade design for precision cutting while a trigger switch with a safety button makes it very safe to use.

Also included are dual handles for steady control, an automatic guard return that keeps the blade covered for safety purposes, two 24-tooth carbide tip and diamond coated blades for cutting different materials, and a tool-free hand-adjustable table height to your convenient height level.

On the downside, this tool lacks a miter gauge, rip fence, and vacuum port for helping is sucking out the dust.


  • Affordable
  • Wobble-free blade design for precision cutting
  • A safety button for preventing accidental starts
  • Dual handles for steady control
  • Tool-free hand-adjustable table height


  • Lacks a vacuum port
  • No miter gauge and rip fence

6. TruePower 01-0130 – Best With High Cutting Capacity

TruePower 01-0130
Photo: TruePower
  • Power: 1800 watts
  • Max Depth of Cut: 3.25 inches
  • Blade Size: 10 inches
  • Weight: 20 pounds

Truepower’s 01-0130 rounds up the list, and it is characterized by a wide cutting capacity, which is capped at 3.25 inches when cutting at a 90˚ angle and 2.5 inches when cutting at a 45˚ angle.

That said, this table saw is built to perform rip, miter, bevel, and compound cuts, making it very versatile for any woodworking project. It also features a relatively large 26 x 18.5-inch work surface that can comfortably accommodate relatively large workpieces.

Other features include a steel stand for holding the table saw in place, a safety switch for preventing accidental starts, and a powerful 1800-watt, 15-amp motor to run the blades.

On the downside, the unit is relatively expensive, and it lacks a vacuum port for pulling out dust from the work surface.


  • Wide cutting capacity
  • Performs rip, miter, bevel, and compound cuts
  • Large 26 x 18.5 work surface
  • Comes with a steel stand
  • Powerful 15-amp motor


  • Relatively costly
  • Lacks a vacuum port


In summary, you can get an excellent table saw even if you are tight on cash, and this review is a testament to that. However, these tools have different defining features that are suitable for different types of users.

That said, after going through the review and buying guide above, you should have an easier time picking the best table saw under $200 that matches your requirements.