No, caulk is porous so it lets water drain through! Caulk is for decorating because you can paint over it and it fills cracks easily! Silicone is the perfect solution for resealing around your bath.
When silicone sets it becomes watertight so when you’re in the bath or shower it stops the water from running behind the bath and tiles. If you used caulk as a waterproofing seal you are going to get extreme damp!
Resealing around your bath
If you want to reseal your bath with silicone then you “MUST” clean any previous silicone from both tiles and bath. The more you remove the better the seal will be.
- Use a sharp plastic scraper
If you are very careful then a sharp blade will remove the silicone easily or use a plastic scraper. Do not use anything metal like a scraper because you will scratch your bath and ruin the job!
When you have cleaned all the silicone away, make sure it’s dry and apply another bead of silicone. Be consistent and do not bubble the silicone when using the silicone-gun.
How To Apply Silicone?
To get that curve on the silicone fill a bowl with water and dip your finger into it before running your finger
- Grab some electrical tape
- Put one strip above and one strip below
- Apply the silicone carefully
- Wet finger and run around your bath
- When set remove both lengths of tape
- Your bath is now sealed and watertight!
It can get messy if you do not wet your finger because it will just stick to you. Keep wetting your finger even if it’s every foot or so, take your time and the silicone will look good.